Skip to main content

Motor Selection Tool

Find the correct motor specification for your cooling tower fan based on horsepower, frame size, and speed requirements.

Premium Efficiency Motor Specification TEFC Motors 1 - 250 HP

Fields marked with a * are required.

Contact Information
Motor Performance Requirements
Speed
Torque
3-phase
NEMA Design
Efficiency Level
Rotor design
Service Factor
Insulation Class
Temperature Rise
Enclosure
Mounting
Shaft
Drive End Shaft
Opposite Drive End Shaft
Special Shaft Machining
Material
Bearings
Thrust

Horizontal

Vertical

Lubrication
Bearing Protection
Bearing Electrical Protection
Bearing Temperature Monitoring

Qty. 6 - 2 per phase

Bearing Vibration Monitoring
Sound Level

Max sound pressure level … dBA at … ft or … m, NL.

Motor Starting / Drive
Load WK2 at Shaft
Number Of Starts
Drive Requirements
Inverter
Special Options and Accessories
Winding Temp. Device

Qty. 6 - 2 per phase

Space Heaters
Special Items
Special Testing
  1. Routine tests above.
  2. Measure efficiency at 100%, 75%, 50% and 25% of full load.
  3. Measure power factor at 100%, 75%, 50% and 25% of full load.
  4. Temperature rise test.
  5. Measure locked rotor current.
  6. Measure breakdown and starting torques.

Provide curves of motor speed-torque and speed-current at specified input voltage and frequency.

Determines the stabilized bearing temperature at no load. Specify minimum test duration time on order.

Baldor Matched Performance™ temperature rise test using Baldor motor control.

Operate motor to Class F rise to establish operating envelope for the motor.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

More Tools and Calculators

Two rows of white fiberglass cooling towers with large fan stacks, seen from above at an industrial plant

Need a Budget Price for a New Tower?

Share your flow and conditions and get a budget bid for your project.

Bolt Sizing Chart

Quickly reference bolt dimensions, diameters, lengths, and specifications.

Find the right bolt size

Thread Sizing Chart

Quickly reference thread sizes and pitches.

Find the right thread size

NEMA Guide

Quickly reference NEMA motor frame sizes, dimensions, and mounting details.

Find the right frame size

Driveshaft Selection Tool

Identify the right driveshaft length, coupling type, and material for your cooling tower's mechanical drive system.

Find the right driveshaft

Design & Price a Tower

Configure your cooling tower specifications and get an accurate parts and equipment quote tailored to your project requirements.

Design a tower

Water Usage Calculator

Estimate evaporation, blowdown, and makeup water consumption based on your tower's capacity and operating conditions.

Calculate water usage

Wet Bulb Temperature Chart

Look up wet bulb temperatures by region and season to optimize your cooling tower's thermal performance and sizing.

See the chart

Tonnage Duty Calculator

Determine the cooling duty in tons for your application by entering flow rate, temperature differential, and fluid type.

Calculate tonnage

Rental Tower Selection

Enter your flow and conditions to find the right rental tower module fast.

Find your rental tower

Budget Bid Request

Get a budget price for a new cooling tower based on your flow and conditions.

Start your bid

Frequently Asked Questions

How do I know what replacement motor I need?

Motor nameplate information is the best starting point. CTD may need the horsepower, voltage, RPM, frame size, phase, enclosure type, and service factor to identify the correct replacement.

What are common signs of cooling tower motor failure?

Excessive vibration, overheating, unusual noise, repeated breaker trips, electrical issues, reduced fan speed, and difficulty starting can indicate a motor problem.

Can CTD supply motors for older cooling towers?

Yes. CTD can help identify and source replacement motors for aging or discontinued cooling tower equipment based on the existing motor and tower requirements.

Can I upgrade my cooling tower motor?

Potentially. Motor upgrades should consider fan requirements, gearbox or drive capacity, electrical supply, fan RPM, horsepower, and the overall mechanical system. CTD can evaluate the application before recommending an upgrade.

How can I identify my cooling tower motor?

Start with the motor nameplate. If the information is difficult to read or unavailable, photos of the motor, nameplate, mounting arrangement, and cooling tower fan system can help CTD identify a suitable replacement.

Get in touch

Contact us for sales, service, parts, emergency services, etc.